Additive manufacturing of poly (lactic acid)/hydroxyapatite/carbon nanotubes biocomposites for fibroblast cell proliferation.

Bone tissue is one of the most important in the human body. In this study, scaffolds of poly (lactic acid) PLA reinforced with hydroxyapatite (HA) and carbon nanotubes (CNT) were manufactured, evaluating their mechanical and biological properties. HA was synthesized by wet method and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The scaffolds were produced using additive manufacturing and characterized by optical microscopy, SEM, thermogravimetric analysis (TGA), Raman spectroscopy and biological tests. The SEM results showed that the PLA surface was affected by the incorporation of CNT. TG showed that the incorporation of HA into the polymer matrix compromised the thermal stability of PLA. On the other hand, the incorporation of CNT to the polymer and the impregnation with HA on the surface by thermal effect increased the stability of PLA/CNT scaffolds. Raman spectra indicated that HA impregnation on the surface did not modify the polymer or the ceramic. In the compression tests, PLA and PLA/CNT scaffolds displayed the best compressive strength. In the biological tests, more than 85% of the cells remained viable after 48 h of incubation with all tested scaffolds and groups with CNT in the composition disclosing the best results.

Periquiteira (Cochlospermum orinocense): A Promising Amazon Fiber for Application in Composite Materials.

Natural lignocellulosic fibers (NLFs) have in recent decades appeared as sustainable reinforcement alternatives to replace synthetic fibers in polymer composite material applications. In this work, for the first time, the periquiteira (Cochlospermum orinocense), a lesser known NLF from the Amazon region, was analyzed for its density and, by X-ray diffraction (XRD), to calculate the crystallinity index as well as the microfibrillar angle (MFA), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), scanning electron analysis (SEM) and tensile strength. The apparent density found for the periquiteira fiber was 0.43 g/cm3, one of the NLF's lowest. XRD analysis indicated a crystallinity index of 70.49% and MFA of 7.32°. The TGA disclosed thermal stability up to 250 °C. The FTIR analysis indicated the presence of functional groups characteristic of NLFs. The SEM morphological analysis revealed that the periquiteira fiber presents fine bundles of fibrils and a rough surface throughout its entire length. The average strength value of the periquiteira fiber was found as 178 MPa. These preliminary results indicate that the periquiteira fiber has the potential to be used as a reinforcing agent in polymeric matrices and can generate a lightweight composite with excellent mechanical properties that can be used in various industrial sectors.

Comparison of Young's Modulus of Continuous and Aligned Lignocellulosic Jute and Mallow Fibers Reinforced Polyester Composites Determined Both Experimentally and from Theoretical Prediction Models.

Mechanical properties of composites reinforced with lignocellulosic fibers have been researched in recent decades. Jute and mallow fibers are reinforcement alternatives, as they can contribute to increase the mechanical strength of composite materials. The present work aims to predict the Young's modulus with application of continuous and aligned lignocellulosic fibers to be applied as reinforcement in polyester matrix. Fibers were manually separated and then arranged and aligned in the polyester matrix. Composites with addition 5, 15, and 25 vol% jute and mallow fibers were produced by vacuum-assisted hand lay-up/vaccum-bagging procedure. Samples were tested in tensile and the tensile strength, elasticity modulus, and deformation were determined. Results showed that the intrinsic Young's modulus of the fibers was set at values around 17.95 and 11.72 GPa for jute and mallow fibers, respectively. Statistical analysis showed that composites reinforced with 15 and 25 vol% jute and mallow presented the highest values of tensile strength and Young's modulus. The incorporation of 25 vol% of jute and mallow fibers increased the matrix Young's modulus by 534% and 353%, respectively, effectively stiffening the composite material. Prediction models presented similar values for the Young's modulus, showing that jute and mallow fibers might be used as potential reinforcement of polymeric matrices.